अवलोकनक्विकस्टार्टAPI संदर्भमूल्य निर्धारणचेंजलॉगस्थितिAPI कुंजी प्राप्त करें
डेवलपर्सक्विकस्टार्टAPI संदर्भकंसोलमूल्य निर्धारणAPI चेंजलॉगसेवा की स्थिति
एक्सप्लोर करेंफिल्मेंटीवी शोसहायतासेवा की शर्तेंगोपनीयता नीतिऐप पाएँकुकी नीतिमूल्य निर्धारणधनवापसी और रद्दीकरणस्वीकार्य उपयोग नीतिअधिकार धारकसेवा की स्थितिहटाने की सूचना जांचेंक्या नया है
·

© 2026 Wambesha

v0.110.0
अवलोकन

Discovery

  • SearchGET
  • DiscoverGET
  • LookupGET
  • GenresGET
  • Similar titlesGET

Titles

  • Batch titlesGET
  • Title recordGET
  • SeasonsGET
  • EpisodesGET
  • CreditsGET
  • ImagesGET
  • Where a title is heldGET

People

  • PersonGET
  • FilmographyGET

Changes

  • Change feedGET
  • ChangelogGET

Account

  • Plan and usageGET
  • Usage historyGET
  • Recent requestsGET
  • KeysGET
  • Rotate keyPOST

21 में से 21 एंडपॉइंट

API संदर्भ केवल अंग्रेज़ी में उपलब्ध है।

Account

GET/v1/account

केवल कॉल कोटा

Your plan, this period's usage against its allowances, a period-end projection and your spend controls. Never charged, even past your ceiling.

पैरामीटर

यह एंडपॉइंट कोई पैरामीटर नहीं लेता।

रिस्पॉन्स फ़ील्ड

  • planFREE | STARTER | PRO | STUDIO | ENTERPRISE
  • planPriceCentsinteger · int64

    What THIS account pays per period, in integer cents - a negotiated Enterprise price if one is set, otherwise the published rate.

  • billingIntervalMONTHLY | ANNUAL

    Annual is two months free.

  • billingStateACTIVE | PAST_DUE | FROZEN | SUSPENDED | CLOSED

    FROZEN is a payment dispute; SUSPENDED is an operator action. Both refuse service and neither deletes anything.

  • periodStartstring · date-time
  • periodEndstring · date-time
  • allowancesobject · Allowances

    The ceilings actually in force for this account: the tier default, cell by cell, with any per-account override applied. Resolved at ONE point (MeteringLimitsResolver) so an override cannot apply to some limits and silently miss others.

  • usageobject · Usage

    Spend against the allowances, for the CURRENT billing period.

  • projectionobject · UsageProjection

    Straight-line projection of this period spend to period end, from the fraction of the period elapsed. A projection, not a promise - it assumes the remaining days look like the ones so far.

  • overageEnabledboolean

    Whether this account has opted IN to paying past its plan. The default is FALSE and the default is a hard stop: requests are refused with a 429 rather than billed. You are never charged for usage you did not explicitly opt in to.

  • spendCeilingCentsinteger · int64null हो सकता है

    Your own stop-loss, in integer cents. ENFORCED, not decorative - overage stops here. null means no ceiling, reachable only with overage explicitly enabled.

  • overageMicrosPerVerificationinteger · int64null हो सकता है

    What one verification past the plan costs, in micro-dollars. null means this plan has NO overage at all, which is different from a rate of zero.

  • withinGraceboolean

    Whether the request that produced this response fell inside the 10% grace band above a monthly ceiling. Grace requests are served and are NOT billed. Mirrored on the X-Quota-Grace header.

  • featuresobject · PlanFeatures

    What this plan entitles the account to. Every field is REPORTED from the same table that ENFORCES it, so a capability shown here is one the surface will actually allow.

  • healthobject · ConsoleHealth

    "Is anything broken" - about YOUR integration, not about our platform. A global status page cannot tell a caller their own error rate has moved, which is the question this answers.

रिस्पॉन्स हेडर

  • X-Request-ID

    The id of this request, on every response - success or error. Quote it to support: it is how we find your request in our logs. An X-Request-ID you send is honoured and echoed back, so you can use your own; otherwise we generate one. /v1 error bodies carry no trace id of their own.

  • X-Quota-Reset

    RFC 3339 instant at which the billing period rolls. Present on every response to a request whose key was metered - every 2xx, every error a handler returned, and the quota 429. Absent on a refusal that happens before metering: a missing or unknown key (401), a restricted key or a plan that does not carry the endpoint (403), a public demo-key gate refusal, and the pre-authentication flood throttle.

  • X-Calls-Remaining

    Requests left in the period after this one, never below 0. Present whenever X-Quota-Reset is (see there for when a response carries no quota headers).

  • X-Verifications-Remaining

    How many verifications you can still make before a limit stops you. The daily limit and the monthly allowance are counted separately; this is whichever of the two runs out first. Sent whenever X-Quota-Reset is.

  • X-Quota-Grace

    true when THIS request fell inside the 10% grace band above a monthly ceiling. A grace request is served and is not billed; treat true as "back off now", not as headroom. Always true or false, never absent when the other quota headers are present.

  • Retry-After429

    Seconds to wait before retrying. On every 429 - the quota hard stop, the public demo key's limits, and the pre-authentication flood throttle (which carries this header alone, because no key has been read yet).

  • X-Demo-Challenge-Modeकेवल डेमो कुंजी के साथ

    Sent only on responses to the public demo key. The value interactive asks the documentation page to show the visible verification widget - it is sent once a browser has made more than five runs in ten minutes or has received a 429. The page then repeats the header, X-Demo-Challenge-Mode: interactive, on its next request, with the widget's token in X-Demo-Challenge. Requests made with your own key never receive it.

त्रुटियाँ

  • unauthenticated

  • forbidden

  • plan-required

  • validation-failed

  • rate-limited

  • upstream-unavailable

विवरण⌄

Everything about the account behind the key that made this call: plan, period, allowances, spend against them, the projection to period end, the overage setting and the spend ceiling.

Reading this does not consume quota. It is carved out of the hard stop deliberately - an account that has run out must still be able to see WHY, and charging a call to find out you have no calls left is the wrong answer.

Takes no account identifier: the key identifies the caller. The same answers are available from the session-authenticated console at /api/v1/developer/account, which exists because a customer with no key yet, or who has just revoked their only one, cannot reach this.

पिछलाChangelogअगलाUsage history

इसे आज़माएं

डेमो कुंजी लोड हो रही है…

curl "https://api.wambesha.com/v1/account" \
  -H "Authorization: Bearer YOUR_API_KEY"

उदाहरण

{
  "plan": "PRO",
  "planPriceCents": 9900,
  "billingInterval": "MONTHLY",
  "billingState": "ACTIVE",
  "periodStart": "2026-09-27T00:00:00Z",
  "periodEnd": "2026-10-27T00:00:00Z",
  "allowances": {
    "requestsPerMonth": 5000000,
    "requestsPerDay": 500000,
    "verificationsPerMonth": 100000,
    "verificationsPerDay": 10000,
    "bandwidthBytesPerMonth": 6500000000000,
    "maxKeys": 20,
    "linkTtlSeconds": 43200
  },
  "usage": {
    "requests": 36,
    "verifications": 1,
    "requestsRemaining": 4999964,
    "verificationsRemaining": 99999
  },
  "projection": {
    "requestsAtPeriodEnd": 1800,
    "verificationsAtPeriodEnd": 50,
    "elapsedFraction": 0.02
  },
  "overageEnabled": false,
  "spendCeilingCents": null,
  "overageMicrosPerVerification": 1500,
  "withinGrace": false,
  "features": {
    "bulkExport": false,
    "perpetualRecordsLicence": false,
    "includeAllEligible": false,
    "attested": false,
    "supportResponseHours": 72,
    "slaPercent": null
  },
  "health": {
    "status": "failing",
    "errorRatePercent": 17.14,
    "requestsConsidered": 35,
    "notices": [
      "elevated_error_rate"
    ]
  }
}